How to Install a LEER Latitude Tonneau Cover

Watch how to install the LEER Latitude Tonneau Cover and take your truck's protection and appearance to the next level. This soft-folding cover is engineered to shield your truck bed and cargo from the elements, theft, and road debris so you can drive with confidence wherever you go. With a no-drill, clamp-on design, the Latitude installs quickly and securely without damaging your truck. Crafted from durable, lightweight materials, it stands up to tough weather conditions and daily use, offering long-lasting reliability. Whether you're transporting tools, gear, or personal items or just want a cleaner, more refined look; the LEER Latitude delivers a smart, functional, and stylish solution. Follow the step-by-step installation to get it fitted properly the first time, and experience the ideal blend of convenience, strength, and security every time you hit the road.

LEER Latitude Installation Guide

• 2.5mm Allen Wrench
• 5mm Allen Wrench

1. Prepare Your Truck Bed
   • Make sure the bed rails and tailgate area are clean and free of debris.
   • Remove any old tonneau cover hardware if applicable.
2. Position the Cover
   • Place truck cover over cab end of truck box
3. Cover Positioning
   • Unfold the cover the cover and adjust position over the truck bed for proper cab/tail alignment
   • Line up front position & line up side to side
4. Securing the Cover
   • Carefully refold cover without shifting cover's position on the truck bed
5. Anchoring the Front Panel
   • Select insert that best aligns the clamp to the side of the bed
   • Ensure clamp is positioned under bed wall flange
   • Attach bracket assembly for units with bracket assembly.
   • Hand tighten until the clamp contacts the truck rail. 
   • Tighten an additional two turns. Please note: Do not use a wrench or overtighten
6. Secondary Clamps with Security Buckles
   • Ensure clamp is positioned under bed wall flange
   • Attach bracket assembly for units with bracket assembly.
   • Hand tighten until the clamp contacts the truck rail. 
   • Tighten an additional two turns. Please note: Do not use a wrench or overtighten
7. Installing Rear Strike Plate
   1. Place clamp under bed rail
   2. Tighten flown by hand until contact is made
   3. Tighten both 5mm Allen screws
   4. Once tighten, remove the flower nut
8. Final Checks
   • Check all clamps and hardware for tightness.
   • Make sure the cover opens, closes, and latches smoothly.
   • Check for any gaps that could let in water.